C-more micro EA1-S6MLW Especificações descarregar pdf (Página 9)

1-800-633-0405

B10–40

Operator Interface

C-more 6” Micro-Graphic PLC Connections

Cabling requirements

When using the built in RJ12 serial port (Port1) on the

C-more 6” Micro-Graphic panel to connect with the DL05,

DL06, DL105, DL205, D3-350 and DL405 CPUs, your

cabling choices are fairly simple.

• DV-1000CBL — connects to DL05, DL06, DL105, DL205, D3-350

and D4-450 phone jack.

• D4-1000CBL — connects to all DL405 CPU 15-pin ports.

A maximum cable length of 10 feet between the

C-more Micro-Graphic panel and the PLC is recommended

when powering the panel in Low-Power Mode from the PLC.

The C-more 6” Micro-Graphic panel can also communi-

cate through its built-in 15-pin serial port (Port2) via RS-

232, RS-422 and RS-485 using these cables.

• EA-2CBL — connects to DL05, DL105, DL205, D3-350 and D4-

450 phone jack.

• EA-2CBL-1 — connects to D2-250, D250-1, D2-260, DL06 VGA

connector.

PLC Supported Protocols

• DirectLOGIC K-sequence

• DirectNET

• Modbus (Koyo Addressing)

• Modbus RTU

• Entivity Modbus RTU

• Allen-Bradley DF1 Half Duplex

• Allen-Bradley DF1 Full Duplex

• Allen-Bradley PLC5 DF1

• Allen-Bradley DH485

• GE Fanuc SNPX (90/30, 90/70, Micro 90, VersaMax Micro)

• Omron Host Link (C200 Adapter, C500)

• Omron FINS Serial (CJ1, CS1)

• Mitsubishi Melsec FX

• Siemens PPI

C-more 6” Micro-Graphic Port 1 to DL05 PLC Port 2

C-more 6” Micro-Graphic Port 2 to DL06 PLC Port 2

Port

Panel to

Direct

LOGIC

VGA 15-pin port

serial cable

p/n EA-2CBL-1

DL06 PLC

C-more 6 Inch

Micro-Graphic

Panel

DL05 PLC

Port 2

Direct

LOGIC

serial cable

DV-1000CBL

C-more 6 Inch

Micro-Graphic

Panel

Port 1

LISTED

7M17

Date code:****

5432

R01.

MADE IN CHINA

EA1-S6MLW + serial number

MODEL:EA1-S6MLW

INPUT:12-24V 6.5W

IND.CONT.EQ.

6 5 4 3 2 1

RJ12 serial

communications Port1

Pin Signal

1 Logic GND

not used

RXD (232C)

TXD (232C)

5 +5 VDC

6 Logic GND

Pin Signal

1 Frame GND

TXD (232C)

RXD (232C)

Future

5Logic GND

Pin Signal Pin Signal

6LE

CTS (232C)

RTS (232C)

RXD+ (422/485)

10 RXD– (422/485)

11 TXD+ (422/485)

TXD– (422/485)

Term. Resistor

do not use

15 do not use

PLC 15-pin serial

communications Port2

RS-232 RS-232/422/485

Expansion

Connector

C-more 6” Micro-Graphic Communicaton Ports

1 2 3 4 5 6 7 8 9 10 11 12 13

Comentários a estes Manuais

Sem comentários

C-more micro EA1-S6MLW Especificações Página 9

Comentários a estes Manuais